Q. 163.7( 3 Votes )
Vapor is injected at a uniform rate in a closed vessel which was initially evacuated. The pressure in the vessel
A. increases continuously
B. decreases continuously
C. first increases and then decreases
D. first increase and then becomes constant.
1. Maximum pressure attainable by any liquid is saturation vapor pressure. Saturation vapor pressure is the pressure exerted by vapor above the surface of liquid when the air has become saturated.
2. Initially when vapor is being injected at a uniform rate the pressure inside the chamber will increase.
3. But after a certain limit air inside vessel will become saturated and then if we add more vapor to air it will condense.
4. At that point pressure will stop increasing and will become constant as pressure has reached the value of saturated vapor pressure.
So, pressure will increase first and then will become constant.
Rate this question :
The condition of air in a closed room is described as follows. Temperature 25°C, relative humidity = 60%, pressure = 104 kPa. If all the water vapor is removed from the room without changing the temperature, what will be the new pressure? The saturation vapor pressure at 25°C = 3.2 kPa.HC Verma - Concepts of Physics Part 2
The weather report reads, “Temperature 20°C: Relative humidity 100%”. What is the dew point?HC Verma - Concepts of Physics Part 2
Two glass bulbs of equal volume are connected by a narrow tube and are filled with a gas at 0°C at a pressure of 76 cm of mercury. One of the bulbs is then placed in melting ice and the other is placed in a water bath maintained at 62°C. What is the new value of the pressure inside the bulbs? The volume of the connecting tube is negligible.HC Verma - Concepts of Physics Part 2
Pure water vapour is trapped in a vessel of volume 10 cm3. The relative humidity is 40%. The vapour is compressed slowly and isothermally. Find the volume of the vapour at which it will start condensing.HC Verma - Concepts of Physics Part 2
The temperature and the dew point in an open room are 20°C and 10°C. If the room temperature drops to 15 °C, what will be the new dew point?HC Verma - Concepts of Physics Part 2
An ideal gas is kept in a long cylindrical vessel fitted with a frictionless piston of cross-sectional area 10 cm2 and weight 1 kg. The length of the gas column in the vessel is 20 cm. The atmospheric pressure is 100 kPa. The vessel is now taken into a spaceship revolving round the earth as a satellite. The air pressure in the spaceship is maintained at 100 kPa. Find the length of the gas column in the cylinder.HC Verma - Concepts of Physics Part 2
Figure shows a large closed cylindrical tank containing water. Initially the air trapped above the water surface has a height h0 and pressure 2p0 where p0 is the atmospheric pressure. There is a hole in the wall of the tank at a depth h1 below the top from which water comes out. A long vertical tube is connected as shown.
(a) Find the height h2 of the water in the long tube above the top initially.
(b) Find the speed with which water comes out of the hole.
(c) Find the height of the water in the long tube above the top when the water stops coming out of the hole.
HC Verma - Concepts of Physics Part 2
An ideal gas is kept in a long cylindrical vessel fitted with a frictionless piston of cross-sectional area 10 cm2 and weight 1 kg (figure). The vessel itself is kept in a big chamber containing air at atmospheric pressure 100 kPa. The length of the gas column is 20 cm. If the chamber is now completely evacuated by an exhaust pump, what will be the length of the gas column? Assume the temperature to remain constant throughout the process.
HC Verma - Concepts of Physics Part 2
Find the number of molecules in 1 cm3 of an ideal gas at 0°C and at a pressure of 10–5 mm of mercury.HC Verma - Concepts of Physics Part 2
Consider a gas of neutrons. Do you expect it to behave much better as an ideal gas as compared to hydrogen gas at the same pressure and temperature?HC Verma - Concepts of Physics Part 2